ePrivacy and GPDR Cookie Consent by Cookie Consent
  1. Home
  2. View Cart
  3. Checkout
Online Catalogue

IMPORTANT - When ordering styli please check that the shape of the stylus shown is the same as the stylus you are replacing and if the stylus fitted is different (except for colour) then Contact Us if you need assistance choosing the right stylus as it is possible that the original cartridge installed has been changed to another type requiring a different stylus replacement.

Audio Technica AT-VM95SP Moving Magnet Cartridge 78rpm

Audio Technica AT-VM95SP Moving Magnet Cartridge 78rpm

Price: £75.00

in stock

Since SP records have monoaural modulation, when combining an SP stylus with a stereo body, such as the AT-VM95SP, it is recommended to use the "MONO ON" function of your standard Stereo Phono Preamplifier to minimise record surface noise.
The VM95SP, as stereo cartridge for SP mono records, when used with a dedicated archiving phono preamplifier-equaliser incorporating various functions to generate a mono signal from Stereo inputs (Mono L+R, Mono L, Mono R, LR Variable Mix) allows professional archivers to minimise noise and distortion by sampling the least damage side of the grooves from an old record.

  • 3mil SP stylus for reduced record surface noise
  • Aluminium cantilever
  • 2.7mV output voltage
  • Compatible body with all VM95 Series stylus assemblies

The six models of VM95 Series cartridges all use the same electro-magnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

{SPECIFICATION}
ModelAT-VM95SP
TypeVM Stereo Dual Magnet
MountingStandard 1/2"
Size17.2(H) x 18.9(W) x 28.3(D)mm
Weight 6.1g
Stylus 3 mil Conical Diamond Bonded Round Shank
Cantilever Aluminium Pipe, 23° Vertical tracking angle
Tracking Force 4.5 - 5.5g (standard 5.0g)
Output Voltage 2.7  mV @ 1kHz, 5cm/s
Frequency Response 20 - 20,000 Hz
Output Channel Balance 1.5 dB (1kHz)
Channel Separation 18 dB (1kHz)
Coil Impedance 3.3 kOhm
Coil Inductance 550 mH @ 1kHz
DC Resistance 485 Ohm
Static Compliance 12 µm/mN
Dynamic Compliance 2  µm/mN (100 Hz)
Load Capacitance100 - 200 pF
Load Impedance 47 kOhm
Replacement StylusAT-VMN95SP
Accessories Included Installation Screws 11mm x 2, 8mm x 2, Washers x 2
{REVIEWS}

Recently Viewed