Audio Technica AT-VM95E Cartridge

IMPORTANT - When ordering styli please check that the shape of the stylus shown is the same as the stylus you are replacing and if the stylus fitted is different (except for colour) then Contact Us if you need assistance choosing the right stylus as it is possible that the original cartridge installed has been changed to another type requiring a different stylus replacement.

Audio Technica AT-VM95E Moving Magnet Cartridge

Price: £49.99

Quantity:

in stock

{DESCRIPTION}

The new generation AT-VM95E replaces the multi-award winning AT95E after 38 years best-in-class and the more recent upgraded AT95EX cartridges. The new AT-VM95E has been further upgraded and redesigned to offer the user improved performance and better sound quality.

An improved and distinctive design resulting in a more rigid low resonance housing.
A new coil design delivering increased output voltage (4mV) compared to AT95E and AT95EX.
Newly designed radial damping ring improving and increasing frequency and transient response to 22,000Hz.
Easier to mount using threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws (no nuts).

The VM95 Series will not only replace two legendary Audio-Technica products, its adaptable design allows the inchangeability and the upgrade to more expensive styli

{SPECIFICATION}

Model	AT-VM95E
Type	VM Stereo Dual Magnet
Mounting	Standard 1/2"
Size	17.2(H) x 18.9(W) x 28.3(D)mm
Weight	6.1g
Stylus	0.3 x 0.7 mil Elliptical Diamond Bonded Round Shank
Cantilever	Aluminium Pipe, 23° Vertical tracking angle
Tracking Force	1.8 - 2.2g (standard 2.0g)
Output Voltage	4.0 mV @ 1kHz, 5cm/s
Frequency Response	20Hz-22kHz
Output Channel Balance	2.0 dB (1kHz)
Channel Separation	20 dB (1kHz)
Coil Impedance	3.3 kOhm
Coil Inductance	550 mH @ 1kHz
DC Resistance	485 Ohm
Static Compliance	17 µm/mN
Dynamic Compliance	7.0 µm/mN (100 Hz)
Load Capacitance	100 - 200 pF
Load Impedance	47 kOhm
Replacement Stylus	AT-VMN95E
Accessories Included	Installation Screws 11mm x 2, 8mm x 2, Washers x 2