Audio Technica AT-F2 Moving Coil Cartridge

IMPORTANT - When ordering styli please check that the shape of the stylus shown is the same as the stylus you are replacing and if the stylus fitted is different (except for colour) then Contact Us if you need assistance choosing the right stylus as it is possible that the original cartridge installed has been changed to another type requiring a different stylus replacement.

Audio Technica AT-F2 Moving Coil Cartridge - Discontinued

Price: £175.00

out of stock

{DESCRIPTION}

The AT-F2 stereo cartridge features Audio Technica's celebrated dual coil design and elliptical stylus for class leading quality of sound and reliability.
A neodymium magnet is employed for maximum energy, alongside a pure iron yoke with excellent magnetic properties, to boost the magnetic field concentrated in the coil gap area.
The PCOCC coil enables purer transmission because it does not produce grain boundaries in the direction of the transmission.
The power is generated independently for the left and right channels, which provides outstanding separation characteristics
A reverse V-shaped formation is adopted for the two left and right coils to reduce the vibration mass as seen from the stylus tip and minimize the unnecessary movement of the coils to further diminish the distortion.
Using a precision-crafted sturdy aluminium alloy as the base, the body's structure is made of hard resin, which minimizes parasitic resonance and improves the signal-to-noise ratio.

{SPECIFICATION}

Type	Moving Coil (MC)
Mounting	Standard 1/2"
Size	17.3(H) x 16.8(W) x 28.2(D)mm
Weight	5.0 g
Stylus	Elliptical 0.3 x 0.7 mil
Cantilever	Aluminium tube 23° Vertical tracking angle
Tracking Force	1.8 - 2.2 g (2.0 g Standard)
Output Voltage	0.32 mV (1kHz, 5cm/s)
Frequency Response	10Hz-30kHz
Channel Balance	1.5 dB (1kHz)
Channel Separation	25 dB (1kHz)
Coil Impedance	12 Ohms (1kHz)
DC Resistance	12 Ohms
Coil Inductance	25 µH (1kHz)
Static Compliance	35 µm/mN (100Hz) (cm/dyne)
Dynamic Compliance	9 µm/mN (100Hz) (cm/dyne)
Load Impedance	Min. 100 Ohm (when head amplifier is connected)